AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog

Join or renew for 3 years and receive a free t-shirt
or tech sections on USB flash drive /emailed/CD or past Octagon issues on USB flash drive/emailed/CD
see details in the join the club section at www.mgclub.org!


Mechanical Water Temperature Gauge

Started by 2022, August 09, 2022, 12:06:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

2022

I am working on a 1979 MG . I am trying to install a mechanical not electric water temperature gauge. The fitting that  came with the kit will not work to replace the sending unit in the head.

Can you offer any help as to where to get the right fitting. Thank you.

Joey Mcrary

JohnTwist

If you are fitting a Smith's gauge, the sensor bulb  is the same thread and should work.  The thread is 5/8-18.  If you need a stand off with a base for the temp bulb, use one from a Midget (Moss 361-055). 
If you are fitting a non-original gauge, I can't help without seeing pictures and having measurements.  Consider continue using your electric gauge if the sending units are correct.    Hope this little bit helps.
SAFETY FAST!
John H Twist
SAFETY FAST!
John H Twist
University Motors Online
100 East Beltline Avenue SE
Grand Rapids, MI  49506

616-307-6737
johntwist@universitymotorsltd.com
www.universitymotorsltd.com

If you have found my technical advice helpful, please consider making a contribution to help defray my online expenses.  Go to my website and click the PayPal button: www.universitymotorsltd.com.


   back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog