American MGB Association Message Board

General Area => General Discussion => Topic started by: jazzfess on May 20, 2020, 08:50:14 AM

AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader


Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.mgclub.org!

Title: felt insulation replacement for underneath engine hood/bonnet of my 1977 MGB.
Post by: jazzfess on May 20, 2020, 08:50:14 AM
I am looking to replace the felt insulation underneath the engine hood/bonnet of my 1977 MGB.

Any recommendations?

Thanks in advance,
Don

p.s. I couldn’t find anything on the Moss motors website.
Title: Re: felt insulation replacement for underneath engine hood/bonnet of my 1977 MGB.
Post by: june2020 on May 21, 2020, 09:33:21 AM
Check Little British Car Company for hood liners.

Larry Norton
Title: Re: felt insulation replacement for underneath engine hood/bonnet of my 1977 MGB.
Post by: june2020 on May 21, 2020, 09:36:13 AM
Try www.LBCarCo.com.

Barry Barnes
Title: Re: felt insulation replacement for underneath engine hood/bonnet of my 1977 MGB.
Post by: june2020 on May 21, 2020, 09:37:25 AM
Moss Part #409-008.
$39.99

Ralph Littlefield
Title: Re: felt insulation replacement for underneath engine hood/bonnet of my 1977 MGB.
Post by: june2020 on May 21, 2020, 09:39:55 AM
Use a good spray adhesive, like 3M, and insure you don't get it anywhere you don't want it. When fitting your pad, get help to maneuver it into position where you want it before pressing the pad down into the adhesive. Once down, it's not going to move. Use a plastic or wooden tool to work the edges of the material under the reinforcement under the bonnet/hood. It looks really nice and neat if you can get the pad centered between the reinforcements and then tucked neatly under them.

Scott Stuchell

   AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog