AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader

Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at!

Author Topic: Window Removal  (Read 1651 times)

0 Members and 1 Guest are viewing this topic.


  • Message Board Member not current AMGBA Club Member
  • **
  • Posts: 23
Window Removal
« on: August 22, 2018, 08:26:54 PM »
I'm putting the doors back together and have forgotten how the windows came out. What is the procedure to reinstalling the glass? It looks like the vent window assembly is last to go in?
Noel Tetrev


  • AMGBA Club Tech Staff
  • ****
  • Posts: 121
    • University Motors
Re: Window Removal
« Reply #1 on: August 22, 2018, 08:33:32 PM »
Drop the regulator assembly into the door first.  Then fit the vent window.
Attach the regulator assembly loosely.  Roll the glass onto the bottom track rollers.  Then install the rear track.  Then tighten up the regulator.

Finally adjust the rear track so the window rolls up and down without binding or excessive free play.  The first door will take three hours.  The second about half a hour.  The learning curve is fast.

Hope this helps!

John Twist
Safety Fast!
John H Twist
University Motors Online
100 East Beltline Avenue SE
Grand Rapids, MI  49506


If you have found my technical advice helpful, please consider making a contribution to help defray my online expenses.  Go to my website and click the PayPal button:


   AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog