AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader

Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at!

Author Topic: Door Panels Gasket  (Read 1179 times)

0 Members and 1 Guest are viewing this topic.


  • Message Board Member not current AMGBA Club Member
  • **
  • Posts: 18
Door Panels Gasket
« on: August 11, 2019, 03:18:54 PM »
I am looking for advice. I am working on the door panels for my 1979 MGB. We have cut out the waterproof board to put new vinyl on. The problem we are having is how to cut the holes for the fasteners so that we can put the panel on the door.

We have tried several ways, but are having issues with the board fuzzing around the hole. I am looking for suggestions on the tool to use. If you have done this do you change the type of clip that is used?

It is a keyhole type of cut and the clip slides from larger hole to smaller hole. Suggestions greatly appreciated.

Jennifer Shryock


  • American MGB Association
  • AMGBA Club Administrator
  • *****
  • Posts: 649
  • American MGB Association
    • American MGB Association
Re: Door Panels Gasket
« Reply #1 on: August 11, 2019, 03:41:49 PM »
Depending on the thickness of the panel you can use a gasket punch like this.

I  have used mine for years to pop holes in many parts such as cardboard, cork gasket material and even materials such as 1/8 hardboard.

Mike Pelletier
American MGB Association
phone/text: 773-769-7084

North America's oldest and largest club for all MGBs, MGB-GTs & Midgets.  A nonprofit organization founded in 1975 and offers color magazines, emagazines, technical advice, member recommendations on service shops, registration of your MG, a tradition of service & FREE member classified ads that appear in the magazine & on the website.


   AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog