News:

  AMGBA Technical Sections (Vol. III & IV) - copies of tech topics published from 1997 to current in the Octagon on CD-Rom/USB drive/emailed, indexed: $25; printed version $50 (see club store at www.mgclub.org for ordering details)

Main Menu

AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog

Join or renew for 3 years and receive a free t-shirt
or tech sections on USB flash drive /emailed/CD or past Octagon issues on USB flash drive/emailed/CD
see details in the join the club section at www.mgclub.org!


SU Carbs

Started by JohnTwist, August 06, 2021, 02:51:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JohnTwist

I currently have a Weber carb on my 1980 MGB. I am thinking about installing SU carbs. Have heard you talk about them. Can you suggest exactly what twin carbs I should look for, how much to pay, maybe suggest where I could get a pair? Are rebuild parts available? Don't care too much for the carb. It does the job but would rather have the SU's.
Ted

My advice, if you want SU carburetors (and why would you not?), is to got with the HS carb used 1962-1971.  The HIF carb used 1972-1974 (and on the home models) has a float bowl at the bottom which makes them all but impossible to service in situ.  The HS and HIF use different thicknesses on the mating flanges of the intake and exhaust manifold. The HS is 1/8" thicker. 
I would change your exhaust, whatever it may be now, to the factory manifold and front header pipe.  It's the absolute best for the exhaust flow (double Y construction), and it fits and, properly fitted, doesn't leak.  Headers are not as good for the air flow, they're hot, and they're noisy -- AND they usually leak.  SU carbs look better, too.

So you'll want a "kit" with everything from the manifolding and front exhaust pipe to the carbs, linkages, cables, and air cleaners (conical K&N).  The only shop I know that could put this together and get it to you relatively quickly would be Sportscar Craftsmen in Arvada, CO.  Talk to Paul.  Price?  You'll have to ask him, but less than a supercharger!  Paul's email is in the To: address line above.

At the same time you'll want to get a new distributor conforming to the Lucas 40897 original 62-67 advance curve.  You can purchase one of those (or have yours rebuilt) from Jeff Schlemmer at Advanced Distributor in MN or Rob Medynski at British Vacuum Unit in NH.  All three of these concerns have websites, emails, and phones.

Hope this helps!
SAFETY FAST!
John H Twist
University Motors Online
100 East Beltline Avenue SE
Grand Rapids MI 49506-2410
Cell  616 307 6737
www.universitymotorsltd.com
SAFETY FAST!
John H Twist
University Motors Online
100 East Beltline Avenue SE
Grand Rapids, MI  49506

616-307-6737
johntwist@universitymotorsltd.com
www.universitymotorsltd.com

If you have found my technical advice helpful, please consider making a contribution to help defray my online expenses.  Go to my website and click the PayPal button: www.universitymotorsltd.com.


   back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog